Contour CoreBelt Use & Care Manual page 21

CAUTIONS WITH GEl PAd ElECTROdES
• Use only electrodes supplied by Contour Technology. Other electrodes may
present a risk of unsuitable electrical characteristics with the stimulator.
• The current densities for any electrode exceeding 2 mA/cm^2 may require
special attention of the user.
• Electrodes should not be shared with other persons. Each user must have his/her
own electrode set, as skin reaction or cross contamination may occur.
• Do not immerse the electrodes into water.
• Do not apply a solvent of any kind onto the electrodes.
• Always stop the Contour Technology Muscle Stimulator before removing or
moving the electrodes.
• Wash skin and dry skin thoroughly before applying the electrodes.
• Apply the whole surface of the electrodes firmly to the skin. Do not use
electrodes that do not stick or only partially stick to the skin.
• In case of skin redness under the electrodes after a session, do not start a new
session if skin redness is still evident.
38