Ice Compartment (Automatic Ice Maker); How To Make Ice; Not Making Ice (Stop Ice Making) - Hitachi R-SF62BMJ User Manual

ICE COMPARTMENT
Water Supply Container
Ice Case
Ice scoop
Setting of the Automatic ice
1
maker
Push the
the " 製冰 ( Ice Making)" indicator
lamp.
Take off the Water Supply
2
Container.
When the "Water Supply"
indicator lamp is lit or the water
level reaches to the "Add water
line" , replenish water.
Open the lid and add water.
3
Water level can not exceed
"Container-full line".
Replace the Water Supply
4
Container.
Push it beyond the "Container set
position" line.
※ Water may spill out if the
water supply container is
inclined. Wipe off spilled water
immediately.
Perform " 製冰機清潔 (Ice Maker Cleaning)" when making ice for
the fi rst time or for the fi rst time in a week or more.
Ice making starts
5
automatically and ice is
stored in the Ice case.
Notice
It may take 24 hours or more to make ice for the fi rst time.
8 ices are usually made per 2 ∼ 3 hours.
44
Ice Compartment

How to make Ice

button to turn on
Ice Making button
(AUTOMATIC ICE MAKER)
AUTOMATIC ICE MAKER
Ice Tray
Light ON
Add water line
Container-full
line
Container set position Container set position
Pg.49
Control Panel
Ice Making buttons
"Water Supply" indicator lamp
Display
Not making ice
(Stop Ice Making)
Setting of the automatic ice
1
maker
button to select "停
Push the
止 (Stop) " .
The automatic ice making function
becomes disabled which stops ice
making.
※ "給水 (Water Supply)" remains
off when "停止 (Stop)" is
selected for automatic ice
making. Pg.45
Remove the water supply
2
container and wash it
thoroughly. Dry the container
completely.
(How to maintain
Place the water supply
3
container.
The container should be pushed
in until it passes the " container
set position " line.
Warning
● Do not place your hand in the mechanical
section of the automatic ice maker.
(Rotation of the ice tray may cause injury.)
Ice Making button
Light ON
Pg.49 )