Ice Compartment (Automatic Ice Maker); How To Make Ice; Maker - Hitachi R-S42BMJ How To Use Manual

ICE COMPARTMENT
Water Supply Container
Ice Case
Ice scoop
Setting of the Automatic ice
1

maker

Push the 製冰 (Ice Making)
button to turn on the 製冰 ( Ice
Making) indicator lamp.
Take off the Water Supply
2
Container.
When the Water Supply
indicator lamp is lit or the water
level reaches to the Add water
line , replenish water.
Open the lid and add water.
3
Water level can not exceed
"Container-full line".
Replace the Water Supply
4
Container.
Push it beyond the "Container set
position" line.
※ Water may spill out if the
water supply container is
inclined. Wipe off spilled water
immediately.
Perform 製冰機清潔 (Ice Maker Cleaning) when making ice for
the fi rst time or for the fi rst time in a week or more.
Ice making starts
5
automatically and ice is
stored in the Ice case.
Notice
It may take 24 hours or more to make ice for the fi rst time.
8 ices are usually made per 2 〜 3 hours.
44
Ice Compartment

How to make Ice

Ice Making button
(AUTOMATIC ICE MAKER)
Control Panel
Ice Making buttons
Display
AUTOMATIC ICE MAKER
Ice Tray
Light ON
Add water line
Container-full
line
Container set position Container set position
Pg.50
Not making ice
(Stop Ice Making)
Setting of the automatic ice
1
maker
Push the 製冰 (Ice Making)
button to select 停止 (Stop) .
The automatic ice making function
becomes disabled which stops ice
making.
※ 給水 (Water Supply) remains
off when 停止 (Stop) is
selected for automatic ice
making. Pg.45
Remove the water supply
2
container and wash it
thoroughly. Dry the container
completely.
(How to maintain
Place the water supply
3
container.
The container should be pushed
in until it passes the " container
set position " line.
Warning
● Do not place your hand in the mechanical
section of the automatic ice maker.
(Rotation of the ice tray may cause injury.)
Ice Making
button
Light ON
Pg.50 )