External Antenna Model Wall Mount Instructions - Motorola AP6522 Installation Manual

12

2.6 External Antenna Model Wall Mount Instructions

A wall mount deployment requires hanging the AP6522 access point along its width or length using the pair of slots
on the bottom of the unit. The AP6522 can be mounted on to any plaster, wood or cement wall surface using the
provided wall anchors.
2.6.1 Wall Mount Hardware
• Two customer provided wide-shoulder Phillips pan head self-tapping screws (M3.5 x 0.6 x 20 mm)
• Two wall anchors (customer supplied)
• Security cable (optional)
NOTE
2.6.2 Wall Mount Procedure - New Installation
This section describes a new AP6522 installation with no previous access point existing on the intended wall
surface.
The following screws are recommended: (ANSI Standard) #6-18 X
0.875in. Type A or AB Self-Tapping Screw, or (ANSI Standard Metric)
M3.5 X 0.6 X 20mm Type D Self-Tapping Screw.
AP6522 Access Point