Advertisement
After the wash
The dishwasher will beep six times to indicate the end of the wash program.
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan
assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
Dos and don'ts of loading
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
Ensure that water reaches all items on
the adjustable racks.
Preference options
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
Option
What does
it do?
How to change the setting of an option
CHECK & OPEN
1
Check that there is no wash underway, press
2
ENTER MENU & SCROLL TO OPTION
To enter the menu: press the
until one long beep sounds, then release.
Protruding items will stop the
You are now in the Rinse aid option of the preference options menu.
internal lid of the drawer from
If you want to change the Rinse aid setting, go to step 3 now.
sealing properly, which could result
If you want to change the setting of another option, you will need to scroll to that option first.
in a service call.
To scroll to the next option: press
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
Option
Which option
am I in?
Overcrowding reduces wash
performance.
Possible settings
Example
CHANGE SETTING
3
Press
you need to press
4
SAVE SETTING & QUIT MENU
Press
If plates and cutlery are nesting,
they are less likely to be cleaned
For more info
well.
For detailed information on the
features of your dishwasher
For warranty information
If you...
Dishware is blocking water from
have any questions or comments
reaching items on the adjustable
need a Fisher & Paykel authorized
racks.
technician to service your product
need replacement parts or accessories
want to register your product
Open drawer auto
Rinse aid
Water softener
Regulates the amount
Refer to the
Your DishDrawer is
of rinse aid dispensed.
'Water softener'
factory-set to
Reduce this setting if
section of the
automatically power
there is excess foam
'User guide' for
on for 30 seconds
after a wash. Increase
details.
whenever you open it.
this setting if dishes are
You can turn this
wet or streaky after a
setting off.
wash.
, then open the drawer.
selector on top first with one finger, then the
. To know which option you're in, watch the lights above
Open drawer auto
Rinse aid
Water softener*
red
unlit
blue
unlit
purple
1 to 5
0 to 5
4 indicators lit = setting is 4
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
3 times.
. This will save the new setting and quit the preference options menu.
see your 'User guide'
see your 'Service and warranty' booklet
see your 'Service and warranty' booklet or contact us
GB
toll-free, 24/7
IE
toll-free, 24/7
Beeps at end of
Closed drawer autolock
power-on
wash
Your DishDrawer is
When this setting is on,
factory-set to beep
the drawer will
six times at the end
automatically lock 30
of a wash. You can
seconds after it's closed.
turn this setting off.
It can then be unlocked
by pressing
Keylock or Childlock is also
activated). Useful in boats
or motor homes.
button on the front with another finger, hold both
and
(see table below).
Closed drawer
Beeps at end of wash
power-on
autolock
red
blue
red
red
On or Off
On or Off
On or Off
On
Off
0845 066 2200
www.fisherpaykel.co.uk
1800 625 174
www.fisherpaykel.ie
590190B
(unless
red
11.12
Advertisement
