Troubleshooting - Breville BBL910XL Boss Instruction Book

FOOD PREPARATION
& USAGE
Remove crusts. Cut
bread into 1 inch
(2½ cm) cubes. Use
Bread crumbs
in crumb coatings,
stuffings or in meatballs
and meat patties.
Mix the egg yolk,
mustard and vinegar
Mayonnaise or lemon juice. Add
oil slowly through the
lid. Use for dressing.
Cut into 1½ inch
Hard cheeses
(3cm) cubes.
(like Parmesan
Use in creamy sauces,
and Pecorino)
pasta dishes.
Whip cream to firm
peaks. Add sugar or
Cream
vanilla before blending,
if desired.
This blending chart should be used as a guide only.
12
QUANTITY FUNCTIONS TIME
120g
20 – 30
CHOP speed
seconds
(up to 3 slices)
Up to 4 egg
yolks and MIX speed 1 min 30 sec
2 cups of oil.
130g 15-20
CHOP speed
4½ ounces seconds
300 – 600ml
MILL speed 10 seconds
1¼ - 2½ cups

Troubleshooting

•
Motor doesn't start or Check the blender jug and lid are securely in place.
•
blade doesn't rotate
Check the ON | OFF button and selected function button is illuminated.
•
Check that the power plug is properly inserted into the power outlet.
•
Food is unevenly This can happen when too much food is being blended at one time. Try a
chopped smaller amount, and work in batches if necessary.
•
The ingredients may be too large. Try cutting into smaller pieces. For best
results, ingredients should be in pieces no larger than ¾inch (2cm).
•
Food is chopped too Try blending for shorter period of time. Use the PULSE | ICE CRUSH function
fine or is watery for better control.
•
Food sticks to The mixture may be too thick. Try adding more liquid and/or using a slower
blade and jug speed for blending.
•
Blender overloaded This blender has a motor protection feature to protect against over heating
and/or over current use. When activated OVERLOAD PROTECTION will
flash on the LCD and the blender will be inoperable.
•
If activated, turn the blender off by pressing the ON | OFF button on the
control panel, and unplug the blender. Wait a few minutes then re-plug and
power ON the blender.
•
If OVERLOAD PROTECTION is still flashing, repeat and leave the
blender for at least 20-30 minutes. Once OVERLOAD PROTECTION has
disappeared from the screen the blender is ready to be used again.
•
We recommend blending in smaller batches, or cutting ingredients into
smaller pieces.
13