Memorex MC7100 User Manual page 13

TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
1
2
Press the POWER button 1 to turn the
unit on and insert a CD as described on
page 9. Press the Play/Pause ( ®p)/CD
button 2 to select CD; the total number of
tracks and playing time will appear in the
display, then playback will start automati-
cally. Press the STOP (
BUTTON 3 to stop automatic playback.
3
Press the PLAY/PAUSE (®p)/CD but-
ton to begin playback. The unit will play
all the tracks in the order you pro-
grammed them.
NOTES:
• To skip forward or backward through the programs, press the
Tune/Skip/Search/Min n or Hr o button. When the disc is through playing, it
will stop.
• Programming is the ability to preselect the order in which a series of tracks will
be played.
FAQ:
How do I clear the memory and exit the program playback mode?
While in the program stop mode, press the STOP (I)/CLOCK SET
BUTTON to clear the program and exit the program mode. The display
will show the total tracks and time of the disc again.
OPERATION (CONTINUED)
3
I )/CLOCK SET
1
1 2
1
2
Press the PROG./CH SAVE button 1
once; "P 01" (program number), "00"
track number and the Program indicator
will appear in the display. Select the first
track to be played back using the
Tune/Skip/Search/Min n 2 or Hr o 3
button, then press the PROG./CH SAVE
button 1 again. Repeat this step to pro-
gram additional tracks, up to 20 tracks.
4
Adjust the VOLUME buttons 1 as desired.
When the disc is through playing, it will stop.
Press the STOP (
2 to stop the disc before it is finished.
12
2
1
1 1
2
I
)/CLOCK SET BUTTON