DFI-ITOX G7V300-P User Manual page 82

3
BIOS Setup
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the Suspend
mode and HDD Power Down fields are activated.
Min Saving
Max Saving
User Define
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn
Blank Screen
DPMS
Video Off In Suspend
This field is used to activate the video off feature when the system
enters the Suspend mode. The options are Yes and No.
Suspend Type
The options are Stop Grant and PwrOn Suspend.
Suspend Mode
This is configurable only when the Power Management field is set to
"User Define". When the system enters the power saving time set in
this field, the CPU and onboard peripherals will be shut off.
82
Minimum power saving time for the Suspend Mode
(1 hour) and HDD Power Down (15 min.)
Maximum power saving time for the. Suspend
Mode and HDD Power Down = 1 min.
Allows you to set the power saving time in the
"Suspend Mode" and "HDD Power Down" fields.
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initializes display power management signaling. Use
this option if your video board supports it.