HYOSUNG Aquil GV650 Service Manual page 174

7-29 CHASSIS
● With the instrument panel mounting bolts and instru-
ment panel bracket mounting bolts removed, remove
the instrument panel. (Refer to page 7-17)
● Remove the handlebar mounting bolts, right and left.
● Remove the handlebar. (Refer to page 7-18)
● Remove the steering stem head nut ① and take off
the steering stem upper bracket ②.
● Remove the steering stem nut ③ and draw out the
steering stem.
Clamp wrench : 09940-10122
● Take off the steering stem lower bracket ④.
CAUTION
Hold the steering stem lower bracket by hand to
prevent from falling.
● Remove the upper and lower bearing ⑤.
● Remove the outer race fitted on the steering stem.
This can be done with a chisel.
● Draw out the two inner races fitted to the top and bot-
tem ends of the head pipe.
②
①
③
⑤
④