Connecting The Cables - HP HWP018107 User Manual

Connecting the cables

1. Place the monitor in a convenient, well-ventilated location near the computer or source device.
2. Connect a DisplayPort signal cable or an HDMI signal cable (select models) or a VGA signal cable.
NOTE:
determined by the video cable used. The monitor will automatically determine which inputs have valid
video signals. The inputs can be selected by pressing the
the On-Screen Display (OSD) feature by pressing the
● For DisplayPort digital operation, use the DisplayPort signal cable provided (select models).
Connect the DisplayPort signal cable to the DisplayPort connector on the rear of the monitor and
the other end to the DisplayPort connector on the computer.
8 Chapter 3 Setting up the monitor
The monitor is capable of supporting either analog or digital input. The video mode is
+/source button on the front panel or through
Menu button.