Operation
Key Lock
Press and hold
/
remain functional when key lock is on. When key lock setting is turned on,
appears momentarily and will appear when an inactive key is pressed.
Scanning
The scan function scans all channels and stops at an active channel. When
the signal stops, the UH405SX-2NB waits 2 seconds (Drop-Out Delay) before
scanning resumes.
To initiate scanning
1. Assuming the unit is on CH1 when switched on.
2. Press and hold Channel or
for 3 seconds and scanning starts
3. Press
or
If Channel or is pressed
while the unit is paused on
a channel, scanning will be
NOTE
resumed.
Drop Out Delay
While scanning, the UH405SX-2NB stops at a busy channel and receives a
transmission. When the received signal is over, the unit will wait for 2 seconds
for the return of the signal, otherwise, the radio resumes scanning.
USER LICENSE INFORMATION
The citizen band radio service is licenced in Australia by ACMA
Radio-communications (Citizen Band Radio Stations) Class
Licence and in New Zealand by MED General User Licence
NOTE
for Citizen Band Radio and operation is subject to conditions
contained in those licenses.
UNIDEN UH405SX-2NB
to lock or unlock the keypad.
to cancel scanning.
8
and
keys
UHF CB Transceiver