Getting Started; Battery Installation - Uniden UH405SX-2NB Owner's Manual

Getting Started

BATTERY WARNING
To prevent the batteries from running down, remove them from
the radio if the UH405SX-2NB will not be used for long periods.
NOTE

Battery Installation

Your UH405SX-2NB radio uses 3 AAA ALKALINE batteries for power.
Use only good quality alkaline batteries for maximum life and range.
Note: Batteries are not supplied.
To avoid damage to the unit do not mix old and new batteries.
1. Make sure your radio is off.
2. Remove the battery cover.
3. Insert 3 AAA ALKALINE batteries according
to the polarity symbols inside the battery
compartment.
4. Replace the battery cover.
UNIDEN UH405SX-2NB
2
UHF CB Transceiver