Casio FX-9700GH Service Manual & Parts List page 14

•
To send data using ALL
Send Unit
Starting from the LINK Mode, press the function key
to enter the send mode.
(TRN)
F1
TRANSMIT DATA
ALL
Program
Editor
Function Memory
Matrix
Statistics
Variable Memory
Make sure that the pointer is located at ALL, and
press to specify it as the data type.
EXE
EXE
= = TRANSMIT = =
ALL
YES
F1
Press (YES) to start the send operation, or
F1
(NO) to abort without sending anything.
(YES)
F1
= = TRANSMITTING = =
ALL DATA
TO STOP
* Pressing interrupts the send operation and
AC
returns to the LINK Mode.
The following appears after the send operation is
complete.
COMMUNICATION
COMPLETE
ALL DATA
PRESS [ AC ]
* Press to return to the LINK Mode.
AC
Warning!
Transferring data using ALL causes data in the applicable memory areas of the receiving unit to be replaced
by the received data. Make sure that you do not need the data stored in the receiving unit before you start an
operation using ALL.
NO
F6
F6
: [ AC ]
– 12 –
Receive Unit
Starting from the LINK Mode, press the function key
to enter the receive mode.
(RCV)
F2
RECEIVE DATA
ALL
Program
Editor
Function Memory
Matrix
Statistics
Variable Memory
Make sure that the pointer is located at ALL, and
press to specify it as the data type.
EXE
EXE
= = RECEIVE = =
ALL
YES
F1
Press (YES) to start the receive operation, or
F1
(NO) to abort without receiving anything.
(YES)
F1
= = RECEIVING = =
ALL DATA
TO STOP
* Pressing interrupts the receive operation and
AC
returns to the LINK Mode.
The following appears after the receive operation is
complete.
COMMUNICATION
COMPLETE
ALL DATA
PRESS [ AC ]
NO
F6
F6
: [ AC ]