Alfa Romeo 156 Sound System Manual page 17

Manual station storage
The station being heard can be stored in
the range selected with buttons (21),
(20), (19), (18), (17), (16) numbered
from "1" to "6".
Keep one of these buttons pressed (from
"1" to "6") until the frequency or the sta-
tion name (in case of RDS station) to be
stored will start flashing on the display. Dur-
ing flashing (lasting about 5 seconds) press
the button with which the station shall be
stored. The display will show the button
number.
Automatic station storage
in FA, MA or LA bands
(Autostore function)
The following can be stored:
– 6 stations in FA band if in FM1 or
FM2 band or
– 6 stations in MA band if in MW band
or
– 6 stations in LA band if in LW band.
16
Keep button "AS" (13) pressed until
muting the radio (the display will show "A
MEMORY" for about 1 second).
The stations with the strongest signal in
the preselected band will be then stored on
buttons (21), (20), (19), (18), (17),
(16) numbered from "1" to "6". The
whole frequency range is crossed twice with
increasing tuning sensitivity.
After storing the radio will tune automati-
cally to the stored frequency on button "1"
(21).
WARNING Sometimes the Autostore
function is unable to find 6 stations with a
strong signal. In this case when selecting
free buttons (not stored) the display will
show symbol "0".
Listening to stored stations
Proceed as follows:
– select the required frequency band
– briefly press one of the six station stor-
age buttons.
The display will show the number that cor-
responds to the button.
In bands F1, F2 and FA, if reception is
poor and the RDS mode with alternative
frequency search function is active, the sta-
tion with the strongest signal that is broad-
casting the same programme will be sought
automatically (the display will show "PI
SEEK").
Scanning stored stations
(Preset Scan function)
Proceed as follows:
– select the required band
– press "PRS" (15): all stations stored
in bands FM (F1 and F2), MW or LW
will be tuned in turns for about 10 seconds.
Scanning is possible also with Autostore ac-
tive (FA, MA, or LA).
To stop scanning press button "PRS"
(15) again.