Reset Function - Alfa Romeo 156 Sound System Manual

Tone adjustment
Proceed as follows:
– briefly and repeatedly press the "AU-
DIO" button (2) until the display shows
"BASS" or "TREBLE" (Bass or Treble se-
lection)
– press button " " (3) to increase the
o
basses or trebles or button " " (1) to de-
p
crease them.
Pressing the buttons briefly the change is
gradual by steps.
Pressing them longer, changing is faster.
For a few seconds the display shows the
levels of basses/trebles.
Balance adjustment
Proceed as follows:
– briefly and repeatedly press the "AU-
DIO" button (2) until the display shows
"BALANCE" (select Balance function)
– press button " " (3) to increase sound
o
from right speakers or " " (1) to increase
p
sound from left speakers.
Pressing the buttons briefly the change is
gradual by steps.
Pressing them longer, changing is faster.
For a few seconds the display shows the
balancing levels ("L" = left, "R" = right).
Fader adjustment
Proceed as follows:
– briefly and repeatedly press button
"AUDIO" (2) until the display shows
"FADER" (select Fader function)
– press button " " (3) to increase sound
o
from rear speakers or button "
increase sound from front speakers.
Pressing the buttons briefly the change is
gradual by steps.
Pressing them longer, changing is faster.
For a few seconds the display shows the
fader levels ("F" = front, "R" = rear).

Reset function

Keep the "AUDIO" button pressed (2)
for longer than 2 seconds to select the Re-
set function that shows in central position
all Bass, Treble, Balance and Fader adjust-
ments.
For a few seconds the display will show
"RESET".
Loudness function
To switch this function on/off keep the
" (1) to
p
"LOUD" button (22) pressed for over 2
seconds. The Loudness function increases
basses and trebles and when it is active the
display shows "LOUD".
13