Memorex MVDR2100 User Manual page 52

SYMPTOM
DVD
The unit does not start playback.
Some functions do not operate as
stated.
Selected language is not being
shown in the subtitles, or spoken.
Subtitles are not working properly.
Angle cannot be changed.
The Rating Level password has
been forgotten.
VCD (VIDEO CD)
No menu playback.
DVD RECORDER
Will not record.
A recorded DVD will not play in
another player.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN
THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
TROUBLESHOOTING GUIDE (CONTINUED)
POSSIBLE CAUSE
Rating level set to block the DVD.
DVD not inserted, or inserted upside-down.
A non-playback disc is inserted.
The disc is not placed in the guide.
The disc is dirty.
Some features and functions are not
available on all discs.
If the audio or subtitle language does not
appear on the disc, then the initial setting
will not be seen/heard.
Subtitles appear only when the discs
contain them.
Subtitles not turned on.
Angles may not be recorded on the disc
(see disc jacket/case), or they may only
be recorded on certain scenes.
Call the number listed on the warranty to
get the information to reset the
password.
The VCD inserted does not have the
playback control.
The wrong disc type is inserted.
The DVD is full.
The DVD is locked.
No signal from the selected source.
The DVD+R has not been finalized.
The DVD has not been made compatible.
1-800-4MEMCRP (1-800-469-6877)
Enter your password, and/or change
the rating level.
Insert DVD correctly.
Make sure to insert a DVD
.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
This is normal, try another function.
This is normal, try another disc.
This is normal, try another disc.
Turn the subtitles on.
Try another disc, or wait for a scene
which allows a different camera angle.
After receiving the information, reset
the password and write it down.
Try another VCD.
Use a DVD+RW or DVD+R only.
Insert a blank DVD+R or DVD+RW.
Unlock the DVD (see page 49).
Check the input signal connection or
make sure the correct source has been
selected.
Finalize the CD–see page 49.
Make compatible–see page 49.
51
POSSIBLE SOLUTION