One-Touch Recording - Memorex MVDR2100 User Manual

ONE TOUCH RECORDING
1
Press the ON/STANDBY button to turn on the unit; the
STANDBY indicator will go out.
3
1
2
Set the options as desired (see the page 43). Press the
OPEN/CLOSE button 1 to close the disc tray. "LOAD" will
appear on the screen and in the display. Press the
SOURCE button 2 to select the desired recording source.
NOTE:
• The length of one-touch recording is determined by the disc capacity and recording quality as set on page 42.
RECORDING (CONTINUED)
2
Press the OPEN/CLOSE button to open the disc tray,
"OPEN" will appear on the screen and in the display. Insert
a DVD+R or DVD+RW with the label side facing up on the
disc tray.
4
1
To start recording, press the RECORD button 1; RECORD
will appear on the TV screen and the unit will start
recording after a few seconds. Press the RECORD button
1 again and the unit will record for 30 minutes. Repeatedly
press the RECORD button 1 to increase the recording by
30 minutes each press. To stop recording before the preset
stop time, press the STOP (I) button 2; STOP will appear
on the TV screen and the unit will stop recording after a few
seconds.
45
2
1