Connect The Audio Cable - BenQ RL Series User Manual

To output signal from your monitor, connect the plug of
the HDMI cable to the HDMI out port on the monitor.
Connect the other end of the cable to the HDMI port
of a digital input device.
If there is more than one video transmission method
available to you, you might want to take the picture quality
of each video cable into consideration before making the
connection.
- Better quality: HDMI / DVI-D
- Good quality: D-Sub
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.

3. Connect the audio cable.

Connect the audio cable between the socket on the
rear of the monitor (Line In) and your computer audio
outlet.
You may connect headphones to the headphone jack
found on the back side of the monitor.
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
Or
How to assemble your monitor hardware 11