Connect The Audio Cable - BenQ BL2711U User Manual

2. Connect the PC video cable.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end
without the ferrite filter) to the monitor video socket.
Connect the other end of the cable (at the end with the
ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port
on the monitor. Connect the other end of the cable to
the HDMI port of a digital output device.
To Connect the DP Cable
Connect the plug of the DP cable to the monitor video
socket. Connect the other end of the cable to the
computer video socket.
If the image is not displayed, go to System,
DisplayPort and change the setting to 1.1. And then
connect the cable again.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.

3. Connect the audio cable.

Connect the audio cable between the socket on the
rear of the monitor (Line In) and your computer audio
outlet.
12 How to assemble your monitor hardware
Or
Or