Control Module Faulty; Supply Voltage - Porsche Boxster Technical Manual

Boxster DME diagnosis 24
8
Test point 11
Control module faulty If DTC 101, 102, 103 or 105 is displayed, replace the DME control
DTC 101, 102, module.
103 104 105 ..
, , If DTC 104 IS displayed, erase the fault memory.
Perform a test drive. If DTC 104 is stored again, replace the DME corr
trol module.
Test point 12
Supply voltage Connect voltmeter with control module connector pin 6 and pin 54.
DTC 107 Ignition "ON"
Display: approx. 12.5 V
8
8
8
24 01 DiagnosisjTroubleshooting DME 24 -D 37
Printed In Germany -4, 1996 98624D1