Diagnosis Card; Voltage Supply; Adjusting Illumination Of Lcd Panel; Working Log - Porsche Boxster Technical Manual

Boxster Diagnosis 0
8
Diagnosis Card Voltage supply
Three types of voltage supply are possible for
the Porsche System Tester 2:
-Internal rechargeable battery (operating time
approx. 20 min)
-Vehicle battery (supply via plugged-on diag-
nosis lead,. Diagnosis Card)
-Mains power supply.
Before putting the unit into operation, make
sure that the mains voltage and the voltage spe-
8
cified on the mains power supply unit are the
612 -96 same.
The Diagnosis Card is the interface between the
Porsche System Tester 2 and the vehicle.
Adjusting illumination of LCD panel
The Diagnosis Card is responsible for the diag-
P k 2 5 d k 2 4 . t t I d I ' It ress ey .an ey .
nosls repor s, con ro -mo u e programming vo -
D
.
I
b .
ht "" ISp ay rig er
age and for voltage supply to the Porsche
System Tester 2 via the vehicle battery. Press key 2.5 and key 2.6
II..Display darker
The Diagnosis Card can be left in the Tester.
Working log
During diagnosis, e.g. when the fault memory is
8 being read out, a "save" symbol appears near
the softkeys. This item is saved in the working
log if the corresponding softkey is pressed.
The working log can be printed out with key 2.3.
It is thus possible to document all stored faults,
for example.
8
Operating instructions, Porsche System Tester 2 0 -D 9
Printed in Germany -3, 1996 9860_D3
",-" ,