Asus Pentium TX97-E User Manual page 28

Pentium motherboard
Hide thumbs Also See for Pentium TX97-E:
Table of Contents

Advertisement

5. CPU Cooling Fan Connector (FAN)
This connector supports a 3-pin CPU cooling fan of 500mAMP (6WATT) or
less with a minimum of 3,500RPM. Depending on the fan manufacturer, the
wiring and plug may be different. The red wire should be Positive, the black
should be Ground, and the yellow wire should be Rotation signal.
WARNING: The CPU and/or motherboard will overheat if there is no airflow
across the CPU and onboard heatsinks. Damage may occur to the mother-
board and/or the CPU fan if these pins are incorrectly used. These are not
jumpers, do not place jumper caps over these pins.
12Volt Chassis, CPU, Power Supply Fan Power
6. Chassis Open Alarm Lead (CHASSIS)
This lead is for an open chassis monitor. A high level signal to the CHASSIS
lead will indicate to the system that the chassis has been opened.
Chassis open alarm lead
28
III. INSTALLATION
Power Supply Fan
Chassis Fan Power
CPU Fan Power
Rotation
+12 Vlot
Ground
CHASSIS
ASUS TX97-E User's Manual
Air Flow
Orientate the fins so that air flow
runs across motherboard's heatsinks.
+5Volt Stand By
Ground
Air Flow

Advertisement

Table of Contents
loading

Table of Contents