Jumper Settings; Environment Variables; Sound Environment Variable; Blaster Environment Variable - Asus Pentium TX97-E User Manual

III. INSTALLATION

Jumper Settings

1. Onboard Multi-I/O Selection (IO SEL)
You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-
lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis-
able all Multi-I/O items at once with the following jumper in order to use your
own Multi-I/O card.
Multi-I/O SIO
Enable [1-2] (Default)
Disable [2-3]
2. Flash ROM Boot Block Programming (BBLKW)
This sets the operation mode of the boot block area of the Programmable Flash
ROM to allow programming in the Enabled position. This is required only if
prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.
Programming BBLKW
Disabled [1-2] (Default)
Enabled [2-3]
I/O
1
2
3
Enable (Default)
Super Multi I/O Setting (Enable / Disable)
BBLKW
Disabled/Protect
(Default)
Boot Block Programming (Disable / Enable)
ASUS TX97-E User's Manual
I/O
1
2
3
Disabled
BBLKW
Enabled
15