Setting The Clock - Memorex MT1132 Owner's Manual

SETTING THE CLOCK

1 Press the MENU button twice to bring
up the menu screen and select
CLOCK SET.
CLOCK SET
SUN - - : - - AM
EXIT
[MENU] : MOVE
[+] / [-] : ADJUST
2 Use the + or – button to select the
correct day of the week.
CLOCK SET
TUE - - : - - AM
EXIT
[MENU] : MOVE
[+] / [-] : ADJUST
3 Press the MENU button to go to the
next step.
4 Use the + or – button to select the
correct hours(s).
CLOCK SET
TUE 1 : - - AM
EXIT
[MENU] : MOVE
[+] / [-] : ADJUST
5 Press the MENU button to go to the
next step
6 Use the + or – button to select the
correct minute(s).
CLOCK SET
TUE 1 : 35 AM
EXIT
[MENU]
[+] / [-]
7 Press the MENU button to go to the
next step.
Use the + or – button to select AM or
8
PM.
CLOCK SET
TUE 1 : 35 PM
EXIT
[MENU]
[+] / [-]
9 Press the MENU button. EXIT will flash.
10 Press the + or – button to exit.
NOTES
To display the day and time at any time.
Press the RECALL button twice. To
remove the display, press the RECALL
button again.
To correct the day or time, follow step
1 to bring up the clock set menu. Then
press the MENU button until the
section of the display you want to
correct is flashing. Use the + or –
button to correct the day or time.
Finally, press the MENU button until
EXIT is flashing, then press the + or –
button to exit.
You may have to reset the clock if there
is a power outage or if you unplug the
TV.
– 10 –
: MOVE
: ADJUST
: MOVE
: ADJUST