Canon Power Shot SX710 HS User Manual page 109

● Connections require that a memory card be in the camera.
●
You can also change the camera nickname on the screen in step
2 ( = 131).
●
Not all NFC-compatible smartphones have an N-Mark (
details, refer to the smartphone user manual.
●
You can also send multiple images at once and change the image
size before sending ( = 124).
To disable NFC connections, choose MENU ( = 28) ► [
●
► [Wi-Fi Settings] ► [NFC] ► [Off].
Connecting via NFC When Camera Is in Playback Mode
●
Press the [ ] button to turn the camera
on.
●
Touch the smartphone with Camera
Connect installed ( = 107) against the
camera's N-Mark ( ).
●
Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
●
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
●
Repeat this process to choose additional
images.
● After you finish choosing images, press
the [ ] button.
●
Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
●
The images are now sent. The
connection is ended automatically after
image transfer.
● If during connection a message on the camera requests you to
enter the nickname, follow step 2 in "Sending Images to an NFC-
Compatible Smartphone" ( = 107) to enter it.
●
). For The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
You can preset images to transfer at your desired size ( = 124).
●
] tab
Sending to a Smartphone Assigned to the Button
Once you have connected to a smartphone initially by pressing the [ ]
button, you can simply press the [ ] button after that to connect again for
viewing and saving camera images on your connected device.
These steps show how to use the camera as an access point, but you can
also use an existing access point ( = 112).
1
Install Camera Connect.
● For an iPhone or iPad, find Camera
Connect in the App Store and download
and install the app.
● For Android smartphones, find Camera
Connect in Google Play and download
and install the app.
2
Press the [ ] button.
●
Press the [ ] button.
●
If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons or
turn the [ ] dial to choose [OK], and then
press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
109