Canon Power Shot SX710 HS User Manual page 138

Metric / Non-Metric Display
Change the unit of measurement shown in the zoom bar ( = 31), the
MF indicator ( = 72), and elsewhere from m/cm to ft/in as needed.
●
Choose [Units], and then choose [ft/in].
Checking Certification Logos
Some logos for certification requirements met by the camera can be
viewed on the screen. Other certification logos are printed in this guide, on
the camera packaging, or on the camera body.
● Choose [Certification Logo Display], and
then press the [ ] button.
Display Language
Change the display language as needed.
●
Choose [Language
the [ ] button.
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose a language, and
then press the [ ] button.
●
You can also access the [Language] screen in Playback mode by
pressing and holding the [ ] button and immediately pressing
the [ ] button.
Adjusting Other Settings
The following settings can also be adjusted on the [
[Video System] ( = 143)
●
[Wi-Fi Settings] ( = 106)
●
[Mobile Device Connect Button] ( = 109)
●
Before Use
Basic Guide
], and then press Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
] tab.
Setting Menu
Accessories
Appendix
Index
138