Settings And Operating Data; Operation - Dimplex WPR 2006 Operating Instructions Manual

Operation

3.3 Settings and Operating Data

Menu for setting system-specific parameters (see Chap. 8 on p.
5). Dynamic menus hide non-essential settings.
Time Time settings
Operation Various operating mode settings available
(see Chap. 3.2 on p. 2)
Heating circuit 1 Settings for heating circuit 1
Heating circuit 2 Settings for heating circuit 2
Cooling Settings for cooling operation
Domestic hot Settings for DHW preparation
water
Language Sets the language desired
for menu navigation
Heating characteristic curves (see Chap. 6 on p. 5)
The heating characteristic curve can be adjusted to individual
temperature requirements using the Warmer/Colder buttons on
4 Operation
The heat pump controller is operated using 6 keys: Esc,
Modus, Menu, , , . Different functions are assigned to
⇓ ⇑ ↵
these buttons according to the current display (Standard or
Menu).
The operating status of the heat pump and the heating
system is indicated in plain text on a 4 x 20 character LC
display (see Chap. 9 on p. 8).
Fig. 4.1: Standard LC display - main display with operator buttons
NOTE
Contrast:
The display can be adjusted for contrast. Do this by depressing the
buttons (MENU) and ( ) at the same time until the adjustment process has
↵
been completed.
Increase the contrast by simultaneously pressing the ( ) button. Reduce
the contrast by pressing the ( ) button.
www.dimplex.de
the main display. Increase or reduce the temperature with the
buttons.
⇓
DHW heating (see Chap. 7 on p. 5)
Adjust the domestic hot water temperature in the menu item
"Settings – Domestic Hot Water".
Operating data menu (see Chap. 8.2 on p. 6)
Display of measured sensor values
History menu (see Chap. 8.3 on p. 7)
Display of runtimes and stored data
Displays (see Chap. 9 on p. 8)
Display of the current operating status of the heat pump
system
6 different operating modes can be selected:
Cooling, Summer, Auto, Party, Vacation, 2nd heat
generator.
The menu consists of 3 main levels:
Settings, Operating data, History
(see Chap. 6 on p. 5)
4
/
⇑
E-3