D-Link DSL-225 User Manual page 52

Wireless Security Mode – WPA2
Wi-Fi Protected Access (WPA2) is the most advanced wireless security method that we can use to prevent unautherized wireless access to this router. WPA2-Enterprise
requires the use of an external RADIUS server.
After selecting to use WPA2 network authentication as your wireless security mode,
the following parameters will be available to configure:
Protected Management Frames: Select to Disable, Capable, or Required.
WPA2 Preauthentication: Select to enable or disable the WPA2 pre-authentication
option here.
Network Re-auth Interval: Enter the network re-authentication interval value here.
WPA Group Rekey Interval: Enter the group key update interval value here.
RADIUS Server IP Address: Enter the IP address of the external RADIUS server
used here.
RADIUS Port: Enter the external RADIUS server port number used here.
RADIUS Key: Enter the RADIUS server Shared Secret here. This key must be
configured on all the wireless clients for them to be able to connect to your
wireless network.
WPA Encryption: Select the WPA2 encryption method here. Options to choose
from are TKIP, AES, and TKIP+AES.
WEP Encryption: By default this is disabled.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
Web User Interface Configuration
D-Link DSL-225 11N VDSL2 Router User Manual
Page 52