After clicking the Configure System Log button, the following page is available.
In this section we can configure the System Log parameters for this router.
Log: Select the log state here. Options to choose from are Disable and Enable.
Log Level: Select the log level option here. Options to choose from are
Emergency, Alert, Critical, Error, Warning, Notice, Information, and
Debugging.
Display Level: Select the display level option here. Options to choose from are
Emergency, Alert, Critical, Error, Warning, Notice, Information, and
Debugging.
Mode: Select the mode option here. Options to choose from are Local, Remote,
and Both.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
Web User Interface Configuration
D-Link DSL-225 11N VDSL2 Router User Manual
Page 128