PLAYBACK OF A CD
1
1
2
Set the Power Switch 1 on the back of the unit to the ON
position. Then press the Power/Standby button 2 to turn
on the unit. The Power/Standby button will light blue.
3
Press the Open/Close button to close the disc tray. After
loading, Track 1 will automatically start playing.
If the Disc Auto Playback setting (see page 19) is enabled,
the disc will automatically start playback.
5
To stop playback, press the Stop ( X ) button 1. Because
the unit will remember where you stopped, simply press the
Play ® button 2 to resume playback where you left off
(resuming playback).
If the Stop ( X) button 1 is pressed again, the unit will enter
the Stop mode.
2
1
CD OPERATION
2
1
Press the Open/Close button 1 to open the disc tray and
insert a disc with the label side facing up on the disc tray 2.
4
Press the Pause p button 1 to pause playback. Press the
Pause p button 1 again or the Play ® button 2 to resume
playback.
NOTES:
•
This unit has a resume function that will allow you to
resume playback from the point you last stopped.
Resuming playback may not work on all discs.
•
While in MEDIA CENTER, select AUDIO CD. Then press
the ENTER button to select it and start playback.
39
2
2
1