Child Lock; User Information - Dimplex QRAD050 Operating Instructions Manual

Child Lock

To lock the controls press Back and Enter for three seconds. Child Lock will
appear at the bottom of the screen. To unlock the control repeat the action of
pressing Back and Enter for three seconds.
NOTE: The controls cannot
be adjusted when child lock
is active.

User Information

Press and hold Enter for five seconds to display the User Information menu;
SP Range (set point) allows adjustment of the maximum temperature.
Open Window detection (OW). When enabled the appliance will reduce the
target room temperature to limit the energy wasted when a window is opened.
Occupancy detection (OD) reduces the room temperature when the room
is unoccupied. Note: an additional accessory is required for this function.
Available summer 2015.
EcoStart (ES) – to achieve the desired temperature at the onset of the timed
Comfort On period the appliance anticipates when it needs to start heating
prior to the onset of the timed 'on' period. E.g. room is 16°C, with 21°C at 7am
set on the timer. With ES on the control will start to heat the room before 7am,
reaching 21°C at this time. With ES off the heater will start to heat the room at
7am and will reach 21°C after this time.
Factory reset returns all settings to the factory presets.
NOTE: Open Window
detection is enabled
by default. EcoStart is
disabled by default.
Child Lock
User Info
SP Range
Open Window
Occupancy
EcoStart
Factory Reset
17