Apm Configuration - Asus P5N-T Deluxe Owner's Manual

4.6.3

APM Configuration

Restore on AC Power Loss
PWR Button < 4 secs
Power Up On PCI/PCIE Devices
Power On By External Modems
USB Resume from S5
Power On by RTC Alarm
x Date(of Month) Alarm
x Alarm Time(hh:mm)
HPET Support
Power Up By PS/2 Keyboard
F1:Help ↑↓ : Select Item
ESC: Exit →←: Select Menu Enter: Select SubMenu
Restore on AC Power Loss [Power-Off]
Allows you to enable or disable the Restore on AC Power Loss function.
Configuration options: [Power-Off] [Power-On] [Last State]
PWR Button < 4 secs [Instant-Off]
When set to [Instant-Off], the system goes into Soft-off mode after you press the
power button for less than 4 seconds. When set to [Suspend], the system goes
into Suspend mode after you press the power button for less than 4 seconds.
Configuration options: [Suspend] [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE devices
and the NVIDIA onboard LAN. Configuration options: [Disabled] [Enabled]
®
Power On By External Modem [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
USB Resume from S5 [Disabled]
Allows you to enable or disable the support of USB keyboard or mouse resumption
from S5. Configuration options: [Disabled] [Enabled]
ASUS P5N-T Deluxe
Phoenix-Award BIOS CMOS Setup Utility
Power
APM Configuration
-/+: Change Value
[Power-Off]
Item Specific Help
[Instant-Off]
[Disabled]
Press
[Disabled]
select whether or not
[Disabled]
to restart the system
[Disabled]
after AC power loss
0
0 : 40 : 0
[Enabled]
[Disabled]
Select Menu
[Enter] to
F5: Setup Defaults
F10: Save and Exit
4-31