Chrysler Town & Country 2011 User Manual page 18

Manual Seat Adjustment
Forward/Rearward
Recliner
Memory Seats
• The memory seat feature allows you to save two different driver seating positions, driver's
outside mirror, adjustable brake and accelerator pedals, and radio station preset settings. The
memory seat buttons are located on the driver's door panel.
• Adjust all memory profile settings, press the SET button then press 1 or 2 within five seconds.
• To program a Key Fob to the memory position, press and release the LOCK button within
10 seconds on the Key Fob to be programmed.
• Place the ignition switch in the ON position, select Remote Linked to Memory in the Electronic
Vehicle Information Center (EVIC) and enter Yes.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob.
DO NOT place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped by an
obstruction in the seat's path.
16
GETTING STARTED
• Lift up on the adjusting bar located at the
front of the seat near the floor and release at
the desired position.
• Lift the recliner lever located on the
outboard side of the seat, lean back and
release at the desired position.
CAUTION!