Brewing Espresso - Melitta MEPE123B Owner's Manual

Brewing Espresso

Function
Selector
COFFEE
position
8. Place one Pod into the Coffee Pod
Slot. The Pod will drop down automati-
cally into the machine and the infusion
process begins.
9. Almost immediately, freshly brewed
espresso pours directly into your cup.
NOTE: If you prefer a strong, robust cup of coffee, brew one
ounce shots. If you prefer milder coffee, use more water
to suit your taste.
Let the coffee brew for approximately 10 - 15 seconds.
10. Turn the Function Selector to the
IMPORTANT! You can brew
espresso shots one after
another. Always wait for the
Green "GO" Light. That's
the signal to brew.
11. When brewing is completed, the
Coffee Pod will fall into the Used
Pod Container and 123 Spresso
will automatically set up to brew
the next coffee.
CAUTION: YOU MUST STOP THE WATER FLOW BY TURNING
THE FUNCTION SELECTOR TO
WATER FLOW DOES NOT STOP AUTOMATICALLY.
(continued)
7. When the Green "GO"
Light illuminates, flip the
Function Selector (on the
side of the machine) to
"COFFEE CUP".
MAKE SURE THE GREEN
"GO" LIGHT IS ILLUMINATED
BEFORE PLACING COFFEE
POD INTO THE MACHINE.
•
"NEUTRAL" Position.
Function
Selector
NEUTRAL
position
•
"NEUTRAL." THE
8