Descaling - Melitta One:One MES2B Use And Care Manual

4. Remove the Drip Tray and Overflow Tray, see Figure 12.
5. Remove the Water Tank from the unit. Clean the Water Tank, Pod
Holder, Pod Chamber, Drip Spout, Drip Tray and Overflow Tray with
hot water. If necessary, use a small amount of dish soap.
Note: The Pod Holder, Pod Chamber, Drip Spout, Drip Tray and
Overflow Tray may be washed in the dishwasher (top
shelf only). The top part of the tank can be removed for
thorough cleaning. Do not place the Water Tank in the
dishwasher.
6. Rinse all parts with fresh water after cleaning.
Note: Do not try to dry the inside of the Removable Water Tank
with a cloth because this will leave a residue of lint and
may clog your Coffeemaker.
Regular descaling will extend the service life of your machine and
ensure optimal results over time.
1. Follow the instructions given in "Before Using Your One:One
Pod Brewing System," pages 6 - 9, replacing one fourth of the
water with white vinegar.
2. Do not place a tea or coffee pod in the Pod Holder. Follow the
Brewing Instructions beginning on page 9 to brew three, 8-oz.
cups of the vinegar solution.
3. Remove Water Tank, Pod Holder, Pod Chamber and Drip Spout
and wash thoroughly.
4. Repeat instructions in step 2 (above) up to 4 times in order to
flush vinegar residue. Empty Water Tank and refill with fresh
water after each cycle.

Descaling

13
FIGURE 12
™