Vpn - Samsung Galaxy Tab 10.1 User Manual

Pairing with a Bluetooth Device
Search for a Bluetooth device and pair with it, to exchange
information between your device and the target device. After
pairing, your device and the target device will recognize each
other and exchange information without a passcode or PIN.
Note: When paired, the Bluetooth icon displays in the System Bar.
If you receive a new request for pairing while paired with a Bluetooth
headset, a new Bluetooth icon appears in the System Bar.
From the Home screen, touch
1.
Settings Wireless and networks Bluetooth.
Activate the target device's discoverable mode.
2.
Touch Bluetooth settings
3.
From the list of scanned devices, touch the target device,
4.
then follow the prompts to complete the pairing:
• If the target device requires a PIN, enter a PIN for the target device
and touch OK. When prompted, enter the PIN on the target device.
Tip: Some devices use a default PIN of 0000. Refer to the target device's
user manual.
• If the device allows automatic or smart pairing, your device will
attempt to pair with the device automatically. Follow the prompts on
your device and the target device to complete the pairing.
Apps
Find nearby devices.

VPN

You can use your device's VPN (Virtual Private Network) feature to
connect to VPNs.
Configuring VPN Settings
Configure your device's VPN settings. For more information, see
"VPN settings" on page 74.
Adding a VPN
1. From the Home screen, touch
Settings Wireless and networks
Touch Add VPN to set up a connection to a VPN, using the
2.
following settings:
• Add PPTP VPN: Set up a connection to a VPN with Point-to-Point
Tunneling Protocol.
• Add L2TP VPN: Set up a connection to a VPN with Layer 2
Tunneling Protocol.
• Add L2TP/IPSec PSK VPN: Set up a connection to a VPN with pre-
shared key-based Layer 2/IPsec Tunneling Protocol.
• Add L2TP/IPSec CRT VPN: Set up a connection to a VPN with
Certificate-based Layer 2/IPsec Tunneling Protocol.
Apps
VPN settings.
Connections 56