Sony HT-CT260 Operating Instructions Manual page 28

HT-CT260/HT-CT260HP - HTCT260_CT260HP__EN_FR_ES.pdf
2
Start the Bluetooth connection
from the Bluetooth device.
The (Bluetooth) indicator lights
in blue when the Bluetooth
connection is established.
3
Start playback on the Bluetooth
device.
For details on operation, see "To
control the Bluetooth device"
(page 30).
4
Adjust the volume.
Set the volume of the Bluetooth
device to a moderate level and touch
the VOL +/- touch keys on the
Sound Bar or press the VOL +/-
buttons on the remote control.
Tips
• You can adjust the volume of the system via
a Bluetooth device supporting AVRCP
(Audio Video Remote Control Profile)
VOLUME UP/DOWN. For details, refer to
the operating instructions supplied with the
device.
• The volume of the system may not be
controllable, depending on the device.
Notes
• If the source device has a bass boost function
or equalizer function, turn them off. If these
functions are on, sound may be distorted.
• In the following cases, you will have to make
the Bluetooth connection again.
– The power of the unit does not turn on.
– The power of the Bluetooth device does
not turn on, or the Bluetooth function is
off.
– The Bluetooth connection is not
established.
• If more than one device paired with the unit
is being played back, sound will be heard
from just one of those devices.
28
US
28 of 130
Finishing the B l u e t o o t h
connection
Terminate the Bluetooth connection by
any of the operations listed below.
• Operate the Bluetooth device to
terminate the connection. For details,
refer to the operating instructions
supplied with the device.
• Turn off the Bluetooth device.
• Turn off the system.
http://www.docs.sony.com/release/HTCT260_CT260HP__EN_FR_...
3/24/13 8:44 PM