3
.
3
.
2
G
e
n
e
r
a
l
S
e
3
.
3
.
2
G
e
n
e
r
a
l
S
e
1.
On the Wireless LAN group, select General Setup. The following page will be
shown.
2.
Check Enable Wireless LAN to enable the wireless function.
3.
At present, the router can connect to IEEE802.11b, IEEE802.11g and IEEE802.11n
stations simultaneously. Simply choose Mixed (11b+11g+11n) mode.
4.
Type in the name of the SSID. The default name for SSID is DrayTek. We suggest
you change it to a particular name for your necessity.
SSID (service set
identifier)
Channel
t
u
p
t
u
p
It is used to name the wireless LAN for this router, and it must
have the same content in client PC/notebook wireless card(s).
SSID can be any text numbers or various special characters.
It is a wireless channel for the router. The default channel is 6.
You can change it to an appropriate one if the selected channel
is under serious interference.
19
Vigor3200 Series Quick Start Guide