Cylinder Head Gasket 0.65 Mm - A9618112; Cylinder Head Gasket 0.60 Mm - A9618113; Cylinder Head Gasket 0.55 Mm - A9618114; Cylinder Head Gasket 0.50 Mm - A9618115 - Triumph Daytona 675 Manual

Cylinder Head Gasket
The use of the following Race Kit cylinder head gaskets will require changes to the fuelling
and ignition settings. To alter these settings, a Triumph Programmable Race ECU
combined with Triumph TRACS Race Calibration Software will be required. Failure to
correct the fuelling and ignition settings will result in poor engine performance and could
result in engine damage.
*
* Thickness "t" marking location
Parts Supplied - A9618112 (0.65 mm), A9618113 (0.60 mm),
A9618114 (0.55 mm) or A9618115 (0.50 mm)
Item Description
1 Cylinder head gasket (t = 0.65 mm)
1 Cylinder head gasket (t = 0.60 mm)
1 Cylinder head gasket (t = 0.55 mm)
1 Cylinder head gasket (t = 0.50 mm)
• The thickness of the standard cylinder head gasket is 0.7 mm. The Race Kit
gaskets are available in 0.60 mm, 0.65 mm, 0.55 mm and 0.50 mm
thicknesses. The thickness (t) of the gasket is clearly marked on the gasket in
the position (*) shown above.
NOTE
• Due to variation in production tolerances, the Race Kit cylinder head gaskets
may not be suitable for all engines. Use the appropriate gasket to adjust the
squish height (the squish height is the gap between the flat portion of the
piston and the cylinder head). Always ensure that the chosen gasket provides
a minimum squish height of 0.65 mm.
© Triumph Designs Ltd 2009.
Caution
Page 8 of 47
1
Qty
1
1
1
1