Page 1
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 OWNERS MANUAL Model No. 45-02113 125 LB. TOW BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts FORM NO. 48668 (REV. 5/03)
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 RULES FOR SAFE OPERATION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when operating equipment. •...
Page 3
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 SHOWN FULL SIZE NOT SHOWN FULL SIZE KEY QTY. DESCRIPTION KEY QTY. DESCRIPTION Hex Bolt, 1/4-20 x 1-3/4" Flat Washers 1-5/8" Hex Bolts, 3/8-16 x 1-1/4" Cotter Pin, 3/32" x 3/4" Hex Bolt, 1/4-20 x 3/4"...
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 ASSEMBLY INSTRUCTIONS SHAFT SUPPORT TOOLS REQUIRED FOR ASSEMBLY PLATE CROSSOVER MIDDLE BOLT TUBE Pliers 7/16" Wrenches HITCH 1/2" Wrenches TUBE 9/16" Wrenches REMOVAL OF PARTS FROM CARTON MIDDLE Remove all parts and hardware packages from the carton. LOCK NUT Lay out all parts and hardware and identify using the illustrations on pages 2 and 3.
Page 5
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 9. Assemble a spacer and a 1-5/8" flat washer onto the 14. Assemble the flow control link (end with small hole) to end of the axle that has the large hole. See figure 4. the flow control arm using a 1/4"...
Page 6
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 17. Place a 5/16" flat washer onto the end of the flow control 19. Assemble the flow control mounting bracket to the hitch rod. Insert the end of the rod through the slot in the flow tube using two 1/4"...
Page 7
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 21. Position the flow control mounting bracket (figure 12). a. Push on flow control arm until it locks in "OFF" position. b. Slide flow control mounting bracket along tube until closure plate in bottom of hopper just closes. c.
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 OPERATION HOW TO USE YOUR SPREADER SETTING THE FLOW CONTROL (Refer to figure 12 on page 7.) REFER 1. Loosen the nylon wing nut, set the adjustable stop to the desired flow rate setting and retighten the wing nut. CHARTS The higher the setting number, the wider the opening in the bottom of the hopper.
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 MAINTENANCE SERVICE AND ADJUSTMENTS 1. If the axle, slotted gear and sprocket assembly is CHECK FOR LOOSE FASTENERS disassembled, mark down the positions of the parts as 1. Before each use make a thorough visual check of the they are removed.
Page 10
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 REPAIR PARTS FOR BROADCAST SPREADER MODEL 45-02113 21 22 www.mymowerparts.com...
Page 11
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 REPAIR PARTS FOR BROADCAST SPREADER MODEL 45-02113 REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION 44466 Hopper 43070 Washer, Flat 3/8" * 43882 Rivet, Stainless 41576 Bolt, Hex 3/8-16 x 1-3/4" Lg.*...
Page 12
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983 REPAIR PARTS Agri-Fab, Inc. 303 West Raymond Sullivan, IL. 61951 217-728-8388 www.agri-fab.com www.mymowerparts.com...