Replacing; Solid Aluminum Seat Pan; Removing/ Replacing - TiLite Twist Owner's Manual

CHAPTER 7:
BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT
CUSHIONS
3. Loosen, but do not remove, the Allen screws on the side of the seat upholstery where the adjustment flap is
located on the underside of the seat upholstery. See Figure 7-6.
4. Detach the adjustment flap, adjust the seat upholstery to the desired tension, and re-secure the adjustment using
the Velcro -style material.
®
5. Retighten the Allen screws that attach the seat upholstery to the frame.
6. Reattach the back upholstery to the seat upholstery and replace the seat cushion.

Replacing

Tools required:
• 1/8" Allen Wrench
1. Remove the seat cushion.
2. Detach the back upholstery from the seat upholstery (see "Velcro
Adjustable by Straps Back Upholstery" on pages 7-1 to 7-3).
3. Remove all bolts that attach the seat upholstery to the chair frame. See Figure 7-6.
4. Remove the Bolt-On Seat Sling.
5. If your replacement upholstery included new aluminum seat rails, proceed to Step 6. If not, remove the aluminum
seat rails from old upholstery and insert them into the new upholstery.
6. Place the new seat upholstery on the frame and align the fastening holes in the upholstery and aluminum seat
rails with the holes in the seat tubes of the frame.
7. Loosely install all the bolts on the side of the seat sling where the adjustment flap is located.
8. Install all the bolts on the opposite side of the seat sling and securely tighten.
9. Detach the adjustment flap and adjust the seat upholstery to the desired tension.
10. Fully tighten the bolts that attach the seat upholstery to the frame.
11. Reattach the bottom of the back upholstery to the seat upholstery and replace the seat cushion.

Solid Aluminum Seat Pan

Removing/ Replacing

Tools required:
• 1/8" Allen Wrench
1. Remove the seat cushion.
2. Remove the Allen screws attaching the seat pan to the seat rail. See Figure 7-7.
Twist Owner's Manual
Figure 7-6
Adjusting/Replacing
Allen
Screws
7-4
Bolt-On
Seat Sling
Adjustment
Flap
-Style Adjustable Back Upholstery" or "Tension
®
OM_TWIST_0811RevA