Creating A Raid 1 Array - Asus P4S8X User Manual

5.4.4 Creating a RAID 1 Array

1. In the FastBuild™ Utility Main Menu, select Auto Setup [1].
2. Go to the field Optimize Array for: and select Security. The Mode field
displays Mirror.
3. After making the selection, use <Ctrl-Y> to save it. FastBuild™ offers a
choice between two options. Use <Y> for Create and Duplicate to mirror
a pre-existing hard disk formatted with data that you want to save on
both hard disks; (Go to step 4.) Use <N> for Create Only if using two
new hard disks to configure a new RAID 1 mirrored array; (Go to step 6.)
Do you want the disk image to be
duplicated to another?(Yes/No)
Y -Create and Duplicate
N -Create Only
4. If selecting <Y>, for Create and Duplicate, this screen will be displayed:
88 Chapter 5: Software support