RP424PFC Indoor Gas Fireplace
Unpacking the Crate
The RP424PFC is packaged with the ease of unpacking in mind.
Use the following steps to unpack the crate.
Step 1: Remove the cardboard covering the Accessory tray on top
of the fireplace.
Figure 4.
Step 2: Remove the cardboard wrapping from the crate.
Figure 5.
Step 3: Remove the center brace from the top of the crate by removing
the wood screws securing the brace to the crate ends.
Figure 6.
Page 10
Installation
Step 4: Remove the support that is secured between the Accessory
Tray and the Vent Connection.
Figure 7.
Step 5: Remove the screws securing the right side of the crate where
indicated in Figure 8.
Figure 8.
Step 6: Remove the Accessory Tray.
Figure 9.
XG0781 - 151104