12. Serial connector (9-pin COM2 )
This 9-pin connector connects to a COM2 bracket. Connect the COM2 cable to
this connector and install the bracket on an available slot in the rear panel of
the chassis.
P4P800-X
®
P4P800-X Serial port connector
The COM2 bracket is purchased separately.
13. System panel connector (10-1 pin PANEL)
This connector accommodates several system front panel functions.
P4P800-X
R
P4P800-X System panel connector
•
System Power LED Lead (Green 3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
•
System Warning Speaker Lead (Orange 4-pin SPKR)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
ASUS P4P800-X motherboard
COM2
PIN 1
Power LED
PANEL
IDELED
Requires an ATX power supply.
*
Speaker
Connector
Reset SW
ATX Power
Switch*
1-25