Table of Contents
Advertisement
8. Front panel audio connector (10-1 pin FP_AUDIO)
This is an interface for the front panel cable that allows convenient connection
and control of audio devices.
Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins
LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps
only when you are connecting the front panel audio cable.
P4P800-X
®
P4P800-X Front panel audio connector
9. Chassis intrusion connector (4-1 pin CHASSIS)
This lead is for a chassis designed with intrusion detection feature. This
requires an external detection mechanism such as a chassis intrusion sensor
or microswitch. When you remove any chassis component, the sensor triggers
and sends a high-level signal to this lead to record a chassis intrusion event.
By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a
jumper cap. If you wish to use the chassis intrusion detection feature, remove
the jumper cap from the pins.
P4P800-X
®
P4P800-X Chassis intrusion connector
ASUS P4P800-X motherboard
FP_AUDIO
CHASSIS
GND
(Default)
Chassis Signal
+5VSB_MB
1-23
Hide quick links:
Advertisement
Table of Contents
