Download Print this page

Hotpoint CSF22T Use And Care Manual page 6

With custom ice & chilled water service

Advertisement

.-
L
Water flows from household supply
through dual
solenoidvalve(1)to water
reservoir[2) and to automaticicemaker
[3) as needed.Water is frozen in cube
mold (4) and ejected into storage bin
(5] where a motor-powered auger
movesthem forwardto dispensingunit,
Cubes
dispensethrough chute in door
when "Ice Cubes" cradle is pressed.
Chiiled water from reservoir flows
through tubing in door (6) and is dis-
pensed when "Chilled Water" cradle
is pressed.Light switch (7) turns night
6ighton or off.
Ice
access
door
Icemaker
Manual switch
'----&
Water flows from household supply
throughdualsolenoidvalve(f) to water
reservoir(2)andto automaticicemaker,
[3) as needed.
Waterisfrozenincubemoldandejected
into storage bin (4) where cubes are
accessiblethrougha smallaccessdoor
in the freezer door.
Chilled water from reservoir flows
through tubing in door [5] and is dis-
pensedwhen rubberpad(6] is pressed.
If refrigerator k operated beforewater
mmmmtioo ismade,keep manualice-
mak~rswitch in the (3FFposition,
Wtwm
wakerUIppiy has bmm con-
nectedto icxmalmr:
@Raise access door to ice bin and
turn manual switch to (3N position.
@I Depress water dispenser cradle or
padfor abouttwo minutesto remove
trapped air from water line and to fill
water reservoir automatically,
~ Discard first two glassesof water to
flush impurities from ihe system.
Ice cube mold automaticallyfills with
water after coolingto freezingtemper-
ature, and first cubes normally freeze
after several hours.
Note: With B new/y-instal/ed refriger-
ator, allow about 24 hours for freezer
compartment
to cool
down to proper
icemaking temperature,
Throwawaythefirstfew batches cdice
cubes.This will flush away any impur-
ities in the water line.
Do the same thing after vacations or
extended periods when ice isn't used.
4

Advertisement

loading

This manual is also suitable for:

Csf24d