Optional Operation Of Wired Remote Controller - LG Multi V 2 Series Installation Manual

Installation

Optional Operation of Wired Remote Controller

Two Thermistor System
❈ Therefore system will use value that sensed from indoor unit or remote controller
Temperature sensor location
01 Remote controller
02 Indoor unit
03 2-Thermistor
❈ If you want to know more Optional Operation, please refer to Wired Remote Controller Manual.
16 Indoor Unit
1. Press
enter the installer setting mode until
timer segment display "01:01".
2. Repeat pressing
3. Set Thermistor mode by pressing
(01: Remote Controller,
02: Indoor, 03: 2TH)
4. Press
5. Press
will automatically exit after 25 seconds
without any input.
Operation in remote controller Temperature sensor
Operation in indoor unit temperature sensor
Operation in lower temperature after comparing the temperature
between the indoor unit and remote controller
button for 4 seconds to
button to select Function code 04.
04:01
Function Code
button
button to save or release
button to exit or system
Function
Thermistor setting