Optional Operation Of Wired Remote Controller; Two Thermistor System - LG Multi V System Installation Manual

Optional Operation of Wired Remote Controller

Two Thermistor System

❈ Therefore system will use value that sensed from indoor unit or remote controller
Temperature sensor location
01 Remote controller
02 Indoor unit
03 2-Thermistor
❈ If you want to know more Optional Operation, please refer to Wide Wired Remote Controller Manual.
1. Press
enter the installer setting mode until
timer segment display "01:01".
2. Repeat pressing
04.
3. Set Thermistor mode by pressing
(01: Remote Controller,
02: Indoor, 03: 2TH)
4. Press
5. Press
will automatically exit after 25 seconds
without any input.
Operation in remote controller Temperature sensor
Operation in indoor unit temperature sensor
Operation in lower temperature after comparing the temperature
between the indoor unit and remote controller
button for 4 seconds to
button to select Function code
04:01
Function Code Thermistor setting
button
button to save or release
button to exit or system
Function
Installation Manual 19
Installation