Dimensions; Torque Requirements - Exmark Laser Z XP Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
2.10.8
2.10.9

2.11 DIMENSIONS

2.11.1 Overall Width:
2.11.2 Overall Length:
2.11.3 Overall Height:
2.11.4 Tread Width: (center to center of tires, widthwise)
2.11.5 Wheel Base: (center of caster to center of drive tire)
2.11.6 Curb Weight:

2.12 TORQUE REQUIREMENTS

Bolt Location
Cutter Housing Spindle Nut (secured with threadlocker) 140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt ....................................................... 115-120 ft-lbs. (156-163 N-m)
Jack Shaft Spindle Nut ................................................... 75-80 ft-lbs. (102-108 N-m)
Engine Deck/Front Frame Mount ................................... 30-35 ft-lbs. (41-48 N-m)
Anti-Scalp Roller (See Figure 12)
Starter Mounting Bolts (M10).......................................... 22-27 ft-lbs. (30-37 N-m)
Water Separator Mounting Bolts (M8) ............................ 11-14 ft-lbs. (15-19 N-m)
Hydraulic Oil Filter Head Mounting Bolts (M6) ................ 60-72 in-lbs. (7-8 N-m)
Wheel Lug Nuts.............................................................. 90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts .......................................... 72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut................................................... minimum125 ft-lbs. (169 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts .... 30-35 ft-lbs. (41-47 N-m)
Clutch Retaining Bolt (secured with threadlocker) .......... 55-60 ft-lbs. (75-81 N-m)
Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1 1/2" (3.8 cm) to 5" (10.2 cm.) in 1/4"(6.4 mm) increments.
The cutting height adjustment handle has a transport position and all adjustments
can be made while the operator remains seated. Units also have a foot operated
deck lift assist lever to aid in raising the deck.
Mulching Kit: Optional.
without deck
60" Deck 54.5 in. (138.4 cm)
72" Deck 58.5 in. (148.6 cm)
Roll Bar – Up
60" Deck 82.2 in. (208.8 cm)
72" Deck 86.0 in. (218.4 cm)
Roll Bar - Up
60" Deck 73.7 in. (187.2 cm)
72" Deck 73.7 in. (187.2 cm)
NOTE: Height will vary slightly depending on seat setting
Drive Wheels
60" Deck 42.8 in. (108.7 cm)
72" Deck 46.8 in. (118.9 cm)
60" Deck 54.0 in. (137.2 cm)
72" Deck 56.8 in. (144.3 cm)
60" Deck 1639 lbs. (743 kg)
72" Deck 1657 lbs. (752 kg)
Type A – Whizlock Nut .......................................... 40-45 ft-lbs. (54-61 N-m)
Type B – Nyloc Nut................................................ 30-35 ft-lbs. (41-47 N-m)
Type B – Hex Capscrew ........................................ 50-55 ft-lbs. (68-75 N-m)
www.mymowerparts.com
deflector up
61.4 in. (156.0 cm)
73.2 in. (185.9 cm)
Roll Bar - Down
92.3 in. (234.4 cm)
96.1 in. (244.1 cm)
Roll Bar - Down
55.6 in. (141.2 cm)
55.6 in. (141.2 cm)
Casters
38.9 in. (98.8 cm)
47.6 in. (120.9 cm)
Torque
- 13 -
deflector down
72.2 in. (183.4 cm)
84.3 in. (214.1 cm)