This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit or on the main unit and on
the remote control for more than the standard time (second).
Set
Set Key
Condition
TV mode
VOL. (-) MIN
TV mode
VOL. (-) MIN
DVD mode
VOL. (-) MIN
(No disc)
DVD mode
VOL. (-) MIN
(No disc)
TV mode
VOL. (-) MIN
ALL mode
VOL. (-) MIN
ALL mode
VOL. (-) MIN
DVD mode
STOP (DVD)
(No disc)
Method
Press the following remocon keys
continuously.
SETUP
SUBTITLE
AUDIO SELECT
0
SERVICE MODE LIST
Remocon
Standard
Key
Time
0
2
1
2
4
2
5
2
6
2
8
2
9
2
7
2
The disk cannot be taken out.
Refer to the "TRAY LOCK".
3
Releasing of V-CHIP PASSWORD.
Initialization of factory TV data.
NOTE: Do not use this for data normal servicing.
If you set factory initialization, the memories are reset such as
the clock setting, the channel setting, the POWER ON total
hours.
Initialization of factory on DVD data.
NOTE: Do not use this for normal servicing.
DVD Write mode.
Refer to the "RE-WRITE FOR DVD FIRMWARE".
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Check of the SUM DATA, POWER ON total hours, MICON
VERSION and DIGITAL TV MICON FIRMWARE on the screen.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
Releasing of PARENTAL LOCK.
Refer to the "PARENTAL CONTROL - RATING LEVEL".
Operations
C2-1
Operations